pl518 series 5mm led snap-in holder features *panel mount indicator *snap-in design requires no hardware *mounting hole 6.1 mm (0.24?) *housing material black nylon ul94v-2 *low current, super & ultra bright, bi-color and flashing led available *color transparent (ct) water clear (wc) white diffused (wd) lens available *available with integrated current limiting resistors for 5v, 12v *standard terminals or 26awg red (+) and black (-) 6? wire leads *other wire length and colors available *rohs compliant absolute maximum ratings at t a = 25c reverse voltage (<100 a) ?.??????..??...?...??????..????.. 5.0v max forward current??.????..???????.??..????.???. 30ma peak forward current (1/10 duty cycle, 0.1ms pulse width) ??........??..????.. 100ma operating temperature range???????????????..?. -25c to +85c storage temperature range??????.....????????...?. -25c to +100c soldering temperature (1.6 mm below body) ???....?.????...?.. 2 60c for 5 seconds electrical & optical characteristics at t a = 25c part number emitting color chip material peak wave length view angle 2 ? forward voltage @20ma (v) luminous intensity @20ma (mcd) color diffused lens nm deg typ max min typ PL518-1G13 yellow/green gap 567 50 2.1 3.0 12.0 20.0 all dimensions are in millimeters . tolerance is 0.25mm unless otherwise specified. anode 20.0min. 2.54 6.1 0.2 +0.1 10.6 4.40.5 0.80.5 3.90.5 11.07.14 rev1 jas tel:(866) 695 4162 tel:(719) 589 3122 fax:(719) 589 3592 www.p-tec.net p-tec corp. 2405 commerce circle alamosa co 81101
|